######################################################################

README.txt for MCRU004.exe

######################################################################

MCRU004.exe is a DOS application that Re-initializes the STEC 
SSD drives (4GB SSD drives are not supported by this utility) for the Dell Inspiron 910 Netbook computer.
This process erases all data from the SSD, so be sure to backup all user data before doing so.

To use MCRU004.exe, please follow the directions below:

1) Install the SSD drive to be upgraded into a Dell Inspiron 910 
   Netbook computer.

2) Copy MCRU004.exe onto either a DOS bootable  USB drive, or a network
   bootable DOS partition.

3) Boot the Dell Inspiron 910 from Netbook computer from the USB drive
   or the network partition.

4) After booting to DOS, simply run MCRU004.exe from command line 
   without any arguments. 

   MCRU004 will attempt to access the primary master ATA drive, and
   if a STEC drive is found, then it will attempt to re-init the drive.

5) During the upgrade process, MCRU004.exe will display a series of 
   messages on the screen. There should be a series of 3 steps.

6) After completion of the re-init process, the final line of the 
   display should be:

Firmware version   "G5221-10"


After the completion of this process, SSD will be completely erased and ready for imaging.
If an Error occurs during the process SSD should be returned to the supplier for Failure Analysis or replacement.

######################################################################